Danh mục sản phẩm

Giỏ hàng của bạn

Số sản phẩm: 0

Thành tiền: 0

Xem giỏ hàng

Sản phẩm mới

Thống kê

Đang online 29
Hôm nay 29
Hôm qua 13
Trong tuần 60
Trong tháng 213
Tổng cộng 7,942

Cảm biến lực căng Nireco - MB series - Nireco Vietnam - TMP Vietnam

Mô tả: Đo lực căng
Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Xuất xứ: Nireco
Ngày đăng: 23-05-2016

Chi tiết sản phẩm

Công ty TNHH TM DV Tăng Minh Phát (TMP) Chúng tôi đang là nhà phân phối và thực hiện dịch vụ Ứng dụng trong ngành sản xuất màng nilong , in nhãn màng nilong, sản xuất bao bì, …Của hãng Nireco bao gồm:

-         Bộ điều khiển lực căng Nireco – Nireco Vietnam – TMP Vietnam

-         Hệ thống kiểm tra chất lượng in màng Nireco – Nireco Vietnam – TMP Vietnam

-         Bộ đo vị trí Nireco – Nireco Vietnam – TMP Vietnam

-         Cảm biến chỉnh biên  Nireco – Nireco Vietnam – TMP Vietnam

-         Cảm biến đo lực căng Nireco – Nireco Vietnam – TMP Vietnam


 Mọi thông tin xin liên hệ :

Mr Nghĩa

Email: sale05@tmpvietnam.com

Phone: 0989077459


The MB Tension Sensor was designed to be used with a tension controller or tension meter.
It supports a wide range of products, with any tension range. The MB Tension Sensor has long been a strong seller, since sales were launched 20 years ago.




  • Proven Track Record and Reliability
    Without bearings or similar mechanical contacts, and employing a non-contact detection method using a differential transformer, the MB Tension Sensor is highly responsive with low hysteresis. The compact size also requires little space for installation.
  • Easy to Install
    The MB 05, 11, and 25 can be installed at any angle.
  • Wide Selection of Sensors
    ①Full range available, from low tension (100 N full scale) to high tension (10,000 N full scale)
    ②All sensors have intrinsically safe construction.
  • Overload Resistant
    The durable construction provides resistance to momentary overloads.


Model MB05B MB05A MB11B MB11A MB25B MB25A MB33B MB33A MB41
Rated tension (N) (50)100 200 (50)100 200 500 1000 (2000)
5000 10000
Roll displacement (μm/N) 2.38 1.19 2.63 1.30 0.44 0.22 0.071 0.045 0.023
Allowable roll weight (kg) 10 20 10 20 50 100 300 350 700
Allowable overload (N) Ten times rated load
Unit weight (kg) 1.5 0.8 3.4 16.1 24
Tension resultant direction Forward or reverse possible Forward only (reverse impossible)
Mounting angle Any desired angle
Supply voltage DC +6V
Ambient temperature -10 to +60℃
Applicable bearings -
1. Figures for rated tension and allowable roll weight are for double-sided detection. For single detection the above figures should be halved.
2. A 5m cable with connectors for connection to an amplifier is supplied.
3. MB05, MB11 and MB25 can be wall mounted with a bracket. If the unit is equipped with a bracket, "-W" is added to the end of its model name. e.g.
4. Sensors with inherently intrinsic safety construction are also available. "S" is added to the end of the corresponding model name. e.g. MB11BS.