Danh mục sản phẩm

Giỏ hàng của bạn

Số sản phẩm: 0

Thành tiền: 0

Xem giỏ hàng

Sản phẩm mới

Thống kê

Đang online 11
Hôm nay 11
Hôm qua 10
Trong tuần 21
Trong tháng 181
Tổng cộng 4,922

Cảm biến lực căng Nireco - TSA200 (MB11), TSA1000 (MB25), TSA010K (MB33, MB41) - Nireco Vietnam - TM

Mô tả: Cảm biến lực căng Nireco - TSA200 (MB11), TSA1000 (MB25), TSA010K (MB33, MB41) - Nireco Vietnam - TMP Vietnam
Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Xuất xứ: Nireco
Ngày đăng: 24-05-2016

Chi tiết sản phẩm

 

 

Công ty TNHH TM DV Tăng Minh Phát (TMP) Chúng tôi đang là nhà phân phối và thực hiện dịch vụ Ứng dụng trong ngành sản xuất màng nilong , in nhãn màng nilong, sản xuất bao bì, …Của hãng Nireco bao gồm:

- Bộ điều khiển lực căng Nireco – Nireco Vietnam – TMP Vietnam

- Hệ thống kiểm tra chất lượng in màng Nireco – Nireco Vietnam – TMP Vietnam

- Bộ đo vị trí Nireco – Nireco Vietnam – TMP Vietnam

- Cảm biến chỉnh biên Nireco – Nireco Vietnam – TMP Vietnam

- Cảm biến đo lực căng Nireco – Nireco Vietnam – TMP Vietnam

 

Mọi thông tin xin liên hệ :

Mr Nghĩa

Email: sale05@tmpvietnam.com

Phone: 098907745

 

Overview

web_tsa_2nd.jpg

Applicable to a wide range of materials, and in tension control in industry sectors that will support the next generation!

The TSA tension sensor is a high-performance unit that uses a strain gauge system. The sensor has a high spring rigidity, high resonant frequency, and very little displacement even at high tension levels. This means that the TSA tension sensor is ideal not only in the tension control of paper and PET film, but also for applications in industries that manufacture highly functional films, low-stretch webs and high-value-added products. Nireco also offers an intrinsically safe explosion-proof TSA tension sensor that can be installed in hazardous locations where the atmosphere is explosive.

Intrinsically safe explosion-proof model

Information about "intrinsically safe explosion-proof"

The intrinsically safe TSA tension sensor is installed in hazardous locations where there is the risk of flammable or explosive gas or steam. The tension controller, tension display and power supply are located in a non-hazardous location where there is no hazardous gas or steam. A safety barrier is installed between the tension sensor and these other devices, to maintain a state of safety.

web_tsa_3rd.jpg

  • High spring rigidity
    The sensor's high spring rigidity means that its resonance is high, which makes it ideal for high-speed lines.
  • Little displacement under loads
    As there is very little displacement under load, the TSA sensor is well suited to thin web lines, such as film and foil.
  • Excellent performance
    The sensor's strain gauge system yields superior linearity and hysteresis.
  • Mounting compatibility
    The TSA has the same external dimensions as the earlier MB tension sensor, making retrofitting simple.
    * Cabling will need to be converted or replaced.
    * May not be possible for all models.
 
Standard Model
  Model TSA200
(MB11)
TSA1000
(MB25)
TSA010K
(MB33, MB41)
*1 Rated tension (N) 200 1000 10000
*1 Permissible roller load (N) 200 1000 7000
*1
*2
Permissible overload
(10-times rated load) (N)
2000 10000 100000
  Roller displacement (μm/N) 0.3 0.05 0.005
  Spring constant (N/mm) 3333 20000 200000
*3 Resonant frequency (Hz) 91.0 99.6 108.1
  Output voltage under a single load-rated loading (mV) ±420±63mV/100N ±370±55mV/500N ±535±80mV/5000N
*4 Response time (msec) 0.5 or less
  Mass (kg) 1.4 3.6 16
  Tension direction Forward and reverse direction Forward only (reverse impossible)
  Mounting angle Full 360°
  Power supply voltage ±15VDC (+15V/50mA,-15V/10mA)
  Operating temperature and humidity 0 to 50°C, 35 to 85% R.H., no condensation
  Operating principle Strain gauge detection
  IP protection rating IP30
Note
*1. Values for rated tension, permissible roll weight and allowable overload are those applicable in double-sided detection. The figures for single-sided detection are 1/2 of these values.
*2. The allowable overload indicates the permitted force applied in the direction of the resultant tension.
*3. The resonant frequency listed is that during double-sided detection when tension is at its maximum and when the roll weight is at its maximum.
*4. The response time is that value measured when the tension change is 1/10th of the rated tension.
Intrinsically Safe Construction Model
  Model TSA200S
(MB11S)
TSA1000S
(MB25S)
TSA010KS
(MB33S, MB41S)
*1 Rated tension (N) 200 1000 10000
*1 Permissible roller load (N) 200 1000 7000
*1
*2
Permissible overload
(10-times rated load) (N)
2000 10000 100000
  Roller displacement (μm/N) 0.3 0.05 0.005
  Spring constant (N/mm) 3333 20000 200000
*3 Resonant frequency (Hz) 91.0 99.6 108.1
  Output voltage under a single load-rated loading (mV) ±350±52.5mV/100N ±315±47mV/500N ±460±68mV/5000N
*4 Response time (msec) 0.5 or less
  Mass (kg) 1.4 3.6 16
  Tension direction Forward and reverse direction Forward only (reverse impossible)
  Mounting angle Full 360°
*5 Power supply voltage ±6VDC/20mA
  Operating temperature and humidity 0 to 50°C, 35 to 85% R.H., no condensation
  Operating principle Strain gauge detection
*6 IP protection rating IP30
Note
* 1. Values for rated tension, permissible roll weight and allowable overload are those applicable in double-sided detection. The figures for single-sided detection are 1/2 of these values. 
* 2. The allowable overload indicates the permitted force applied in the direction of the resultant tension.
* 3. The resonant frequency listed is that during double-sided detection when tension is at its maximum and when the roll weight is at its maximum.
* 4. The response time is that value measured when the tension change is 1/10th of the rated tension.
* 5. The power supply voltage indicates the voltage input to the safety barrier.
* 6. Caution indicated by an "X" mark: Do not allow the tension sensor to be subjected to impacts or friction as there is the risk that it may ignite.